Internal dominant face
According to the International Property Measurement Standards (IPMS): Office Buildings, published by the International Property Measurement Standards Coalition (IPMSC) in November 2014, the internal dominant face is:
| The inside finished surface comprising 50% or more of the surface area for each vertical section forming an internal perimeter. |
Where, the vertical section is ‘Each part of a window, wall or external feature of an office buildings where the inside finished surface area varies from the inside finished surface area of the adjoining window, wall or external construction feature, ignoring the existence of any columns.’
NB RICS property measurement, 2nd edition, published by the Royal Institution of Chartered Surveyors (RICS) in January 2018, defines the Internal Dominant Face (IDF) as: ‘The internal finish comprising more than 50% of the floor to ceiling height for each IDF Wall Section. If such does not occur, the Finished Surface is deemed to be the IDF.'
[edit] Related articles on Designing Buildings Wiki
Featured articles
Check out some of the best features and news from Designing Buildings as well as key stories from around the web.
The cost of employing people remains a concern.
Code of Practice for Electrical Energy Storage Systems.
ECA calls on members to comment on draft 4th edition.
Bringing together expertise and creating cultural benefits.
CIOB celebrates positive Ofsted report.
The Building Safety Regulator announces a call for evidence.
Government approach could undermine delivery and regeneration.
World's first mass timber data centre.
The overlooked environmental aspect of data centre development.
Introduction to radon awareness
New technical information sheet published by CIOB.
Updated supplier guide can help electrical contractors engage with NHP.
CIAT confirm the winners of the 2026 architectural technology awards.
Government launches a one stop shop for flood preparedness.
Sir Edwin Lutyens: Britain's greatest architect? Book review.